How Do You Use Side Cutters?

What are side cutter pliers?

Diagonal pliers (or wire cutters or diagonal cutting pliers or diagonal cutters) are pliers intended for the cutting of wire (they are generally not used to grab or turn anything)..

Can I cut my nose stud out?

Right, what you need to do is make sure that you do not irritate it further. Don’t apply anything that will dry out the piercing (hard nope on the salt water!), don’t pull, irratate, cut, or otherwise engage with your piercing right now.

Are pliers the same as wire cutters?

Remember that wire strippers are best for removing the insulation from wire, while cutters are best for (you guessed it) cutting wire. Pliers help you reach, bend, grab, cut, hold and loop wire, and crimpers are the best tool to join two pieces of ductile material together.

What are diagonal side cutters used for?

description and function. Diagonal cutting pliers are used for cutting wire and small pins in areas that cannot be reached by larger cutting tools. Because the cutting edges are diagonally offset about 15 degrees, these can cut objects flush with a surface.

What is the difference between side cutters and flush cutters?

When would you use each if there is a difference? Answer: The term “flush” means level or straight and on the same plane, so flush cutters cut a wire level. Side cutters, or angle cutters, cut on an angle, meaning the wire edge will be cut to one side.

What can I use instead of a wire cutter?

It’s possible to use a hacksaw to cut wire if no cutter is available. You’ll want to use a blade with a high teeth-per-inch (TPI) count for as clean a cut as possible. Regardless of the TPI count, using a hacksaw to cut wire is difficult unless the wire has a large diameter.

What are the best side cutters?

The Best Wire CutterOur pick. Channellock E337CB Diagonal Cutting Plier. Strong cuts, comfy grips. … Budget pick. IRWIN VISE-GRIP Diagonal Cutting Pliers, 6-Inch (2078306) Quality at a bargain. … Also great. Bahco 2101G-180 Ergo Cutting Pliers. Great features, not as strong. … Also great. Klein 11054 Wire Stripper-Cutter. An AV specialist.

Can you cut a nose ring with wire cutters?

do not use wire cutters in your nose!!! soak the piercing site in hot water for about 15 minutes, put atiny bit of liquid soap (anti-bac if you have it, like satin or something) in the water. it should slide out with a pull.

Why do they call side cutters dikes?

Dikes (another name for general-purpose wire cutters), most likely derives its nickname from a blend of the term “diagonal cutters.” Also known as “side cutters” and “diags,” these handy pliers have been an electrician’s best friend and led to an even more provocative idiom: “When in doubt, dike it out.”

What tool can cut metal?

Tin Snips. Like a pair of scissors, tin snips are an inexpensive handheld tool that cuts straight, or if the blade is curved, can cut curves and circles. Tin snips are ideal for cutting soft metals like aluminum and copper, and are especially useful for cutting sheet metal, gutters, metal roofing, and studs.

How do you sharpen a diagonal cutter?

Guide to Sharpening Diagonal Cutting PliersStep 1 – Choose a File. … Step 2 – Clean the Pliers Blades. … Step 3 – Secure the Pliers in a Vice. … Step 4 – Rub the Blade with a File. … Step 5 – Repeat. … Step 6 – Test the Pliers. … Step 7 – Apply Oil.

How do you cut metal without pliers?

Here are a few alternative methods that you can use to cut or break wiring on a job without using wire cutters.1 – Bend it. If the wiring in question is on the thinner side and relatively pliable, you could try bending it. … 2 – Hacksaw. … 3 – Tin Snips. … 4 – Reciprocating Saw. … 5 – Angle Grinder.Sep 24, 2020

What are side cutters used for in Jewellery making?

There are 4 basic types of pliers that are the most commonly used tools for jewellery making and these are side cutters, round nosed pliers, chain nosed pliers and flat nose pliers. Side cutters have sharp jaws that can come in a variety of shapes; these are used for cutting soft wires, threads or metal sheets.

What is the difference between side cutters and diagonal cutters?

Difference between side-cutting and diagonal pliers? Side cutters are High Leverage Side Cutters. These are your Klein’s or Lineman’s. Diagonal cutters are your Dikes or Snips.

What is a side cutter used for?

Side cutters are used on wire and the leads of electronic components, as well as to strip insulation. Stripping refers to safely removing the outer layer without damaging the conductors underneath.

How much wire should I strip?

If you going to wrap the electrical wire around the terminal screw on the electrical receptacle (or a light switch terminal) you need to strip back a bit more than 1/2-inch in order to have enough copper to go around the screw leaving no insulation under the screw head when it is tightened.

What can cut through gold?

A small steel circular saw blade can be used to remove rings made of gold, silver, or platinum. This may also work for titanium rings, but it may take several minutes to make the cut successfully. Diamond blades are more effective for harder materials, such as titanium or stainless steel.

What are diagonal cutting pliers used for?

Proper use of diagonal cutting pliers: For work involving cutting and skinning wires, cutting and removing pins, nails and other fasteners.