Question: What Does Mdix Stand For?

What action will occur if a host receives a frame with a destination MAC address of FF FF FF FF FF FF?

What action will occur if a host receives a frame with a destination MAC address of FF:FF:FF:FF:FF:FF.

The host will process the frame.

The host returns the frame to the switch..

Which statement describes the treatment of ARP requests?

Explanation: One of the negative issues with ARP requests is that they are sent as a broadcast. This means all devices on the local link must receive and process the request.

Are both ends of an Ethernet cable the same?

Technically, you can have the wires in any order you want as long as both ends are wired the same. However, Ethernet cables have standards for the sequence of the wiring, known as T-568A and T-568B. … However, for any other normal Ethernet cable, both ends will have the same wiring sequence.

What is the purpose of auto-MDIX?

Auto-MDIX configures the cable connection automatically, allowing both crossover and straight-through cabling to be used. When the Auto-MDIX interface is connected, it will correct any improper cabling. To ensure the speed is correct, the duplex setting needs to be set to “auto.”

What is the difference between straight through and crossover cable?

When you connect two devices of different types together, you use a straight through cable. When you connect two devices of the same type together, you use a crossover cable. All cables are straight through if you insert a network device between two devices of the same kind.

What is required when using Auto_mdix?

Prerequisites for Auto-MDIX Automatic medium-dependent interface crossover (auto-MDIX) is enabled by default. When you enable auto-MDIX, you must also set the interface speed and duplex to auto so that the feature operates correctly.

What are MDI devices?

Stands for “Medium Dependent Interface.” MDI is a type of Ethernet port found on network devices. Routers often have multiple MDIX ports and a single MDI port called an “uplink” port designed to connect a device such as a cable modem. …

What is crossover cable used for?

An Ethernet crossover cable is a crossover cable for Ethernet used to connect computing devices together directly. It is most often used to connect two devices of the same type, e.g. two computers (via their network interface controllers) or two switches to each other.

Which destination address is used in an ARP?

The ARP process sends a Layer 2 broadcast to all devices on the Ethernet LAN. The frame contains the IP address of the destination and the broadcast MAC address, FFFF. FFFF. FFFF.

Are crossover cables still needed?

Now, the need for crossover cables has been eliminated with more modern equipment. … Thanks to this technology, if you are using Gigabit Ethernet, chances are you will be able to connect your PCs or hubs with regular, straight-through cables, and the NICs on either end will detect the cable and adjust accordingly.

Which is better straight through or crossover?

You should use straight-through cable when you want to connect two devices of different types. You should use a crossover cable when you want to connect two devices of the same type.

What is an MDI cable?

A medium dependent interface (MDI) describes the interface (both physical and electrical/optical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDI-X) interface.

What is Auto-MDIX Cisco?

Auto-MDIX on an Interface. When automatic medium-dependent interface crossover (auto-MDIX) is enabled on an interface, the interface automatically detects the required cable connection type (straight through or crossover) and configures the connection appropriately.

What is MDI MDIX connection?

MDI/MDIX is a type of Ethernet port connection using twisted pair cabling. … An MDIX (for MDI crossover) is a version of MDI that enables connection between like devices.

What is the auto Md IX feature?

Auto-MDI/MDIX feature allows a switch port to automatically detect what type of port is connected on other end (MDI port or MDIX port) and swap the transmission and receive pins. Thus, the transmission pins on one side may connect with the receive pins on other side.

What is Auto-MDIX quizlet?

What is auto-MDIX. a feature that detects Ethernet cable type. When a device is sending data to another device on a remote network, the Ethernet frame is sent to the MAC address of the default gateway. true.

What is the difference between MDI and MDIX?

MDI/MDIX is a type of Ethernet port connection using twisted pair cabling. … The standard wiring for end stations is MDI, whereas the standard wiring for hubs and switches is MDIX. MDI ports connect to MDIX ports using straight-through twisted pair cabling.

What are two actions performed by a Cisco switch?

What are two actions performed by a Cisco switch? (Choose two.)building a routing table that is based on the first IP address in the frame header. … using the source MAC addresses of frames to build and maintain a MAC address table. … forwarding frames with unknown destination IP addresses to the default gateway.More items…•Mar 4, 2018